|
Years |
Project ID
|
Project Title |
Recipient
|
Co-recipient |
| 2026-2030 | GA26-23102S |
Cyclic R-curves to describe fatigue limit of CSAM materials
doc. Ing. Radek Mušálek, Ph.D. |
Czech Technical university in Prague, | IPP |
| 2026-2030 | GA26-21660S |
Cold spraying of beta-titanium alloys
doc. Ing. Jan Čížek, Ph.D. |
Charles University, Faculty of Mathematics and Physics | IPP |
| 2026-2030 | GA26-21439S |
Investigation of processes occurring in non-equilibrium plasma on interfaces between two phases with different permittivity and conductivity
Ing. Petr Hoffer, Ph.D. |
Masaryk University, Brno | IPP |
| 2026-2030 | GA26-22104S |
Characterization of interfacial transport and chemical reactions of plasma generated reactive species in liquid
Ing. Petr Lukeš, Ph.D.
|
IPP | |
| 2025-2029 | TS02030272 |
High-efficiency SOFC/SOEC fuel cells prepared using innovative plasma spraying Ing. Tomáš Chráska, Ph.D. |
IPP | |
|
2025-2028
|
|
Sustainable low-carbon thermal plasma processing platform for valorisation of challenging
waste (SUSPLASM) Mgr. Alan Mašláni, Ph.D.
|
University Gent | IPP, University Antwerp |
| 2025-2027 | FW12010045 |
Components made of composite materials with sensory properties for optical elements in the AEROSPACE area Ing. Martin Veselý |
Entry Engineering s. r. o. | IPP |
| 2025-2027 | FW12010339 |
Intelligent system for online yarn quality control Mgr. Radek Melich, Ph.D. |
Rieter CZ s.r.o. | IPP, Technical University of Liberec, VÚTS, a.s. |
| 2025-2027 | CNR-25-11 |
Development of ultrafast laser diagnostics for transient electrical discharges relevant to new technologies suitable for nitrogen fixation RNDr. Milan Šimek, Ph.D. |
IPP, Istituto per la Scienza e Technologia dei Plasmi CNR |
|
| 2025-2026 | BAS-25-05 |
Determination of the heat flux by Langmuir probes in the divertor of the COMPASS tokamak Dr. Miglena Dimitrova |
IPP, Institute of Electronics, Bulgarian Academy of Sciences |
|
| 2025-2029 |
ERC Consolidator Grant
|
Control over interfaces in metal oxide optical coatings:
the missing piece of the puzzle (akr. COINED) doc. RNDr. Karel Žídek, Ph.D. |
IPP | |
| 2025-2027 | ID 101213280 |
SKILLS4NUCLEAR Dr. Jordan Cavalier |
IPP | |
| 2025-2027 | GA25-15757S |
Plasma waste evaluation for advanced cermet composites for high kinetic energy dissipation
Dr. Vineet Singh Sikarwar |
University of Chemistry and Technology, Prague | IPP |
| 2025-2027 | GA25-17841S |
Can we achieve an inverse wall layer in a tokamak plasma? Redefining the plasma-wall interaction paradigm for future thermonuclear reactors Mgr. Michael Komm, Ph.D. |
IPP | |
| 2025-2027 | GA25-16631S |
Plasma spheroidization of refractory complex concentrated alloys RNDr. František Lukáč, Ph.D. |
IPP | Czech Technical university in Prague, The University of Chemistry and Technology, Prague |
| 2025-2027 | GA25-17822S |
Investigation of micro- and macroscale optical coverage using metal-layer-enhanced second-harmonic generation
doc. RNDr. Karel Žídek, Ph.D.
|
IPP | |
| 2025-2027 | FW11020054 |
Smart measurement of the shapes of optical surfaces using an optical digital twin
Mgr. Radek Melich, Ph.D. |
OPMET Labs s.r.o. | IPP |
| 2024-2028 | TS01030051 |
Innovative shield against extreme heat flows in plasma reactors
Mgr. Jan Horáček, Ph.D. DSc. |
IPP | |
| 2024-2028 | TS01030183 |
Use of additive cold spray technology for preparation of fusion reactor critical components Ing. Jan Medřický, Ph.D. |
IPP | |
| 2024-2026 | GA24-12763S |
Targeted microstructure manipulation for additive shaping of ODS alloys
Ing. Monika Vilémová, Ph.D. |
IPM | IPP |
| 2024-2026 | GA24-10903S |
Research on the formation of nanocavities with the subsequent formation and multiplication of electrons in water using laser-based diagnostics RNDr. Milan Šimek, Ph.D. |
IPP | |
| 2024-2026 | GA24-12872S | Advanced closed nanocomposite structure CsPbBr3/ZnO/PS with effective response to ionising radiation Dr. hab. Mgr. Maksym Buryi, Ph.D. |
Czech Technical university in Prague | IPP |
| 2023-2028 | TN02000020 |
Centre of Advanced Electron and Photonic Optics Ing. Jan Václavík Ph.D. |
ISI | IPP |
| 2023-2028 | TN02000069/001(N) |
NCK MATCA 2: Sensory medicine for the 21st century
Dr. hab. Mgr. Maksym Buryi, Ph.D.
|
PI | |
| 2023-2027 | 101119988 |
Refurbishment and additive manufacturing accomplished by kinetic deposition (Re-MAKE)
doc. Ing. Jan Čížek, Ph.D. |
Mechanical, Materials and Manufacturing Engineering University of Nottingham | IPP |
| 2023-2027 | 101131771 |
European Laser Research Infrastructures serving Science and Industry (Laser4EU) Ing. Miroslav Krůs, Ph.D.
|
Aix-Marseille University | IPP |
| 2023-2027 | 101093261 | Plasma Exascale-Performance Simulations CoE - Pushing flagship plasma simulations codes to tackle exascale-enabled Grand Challenges via performance optimisation and codesign
(David Tskhakaya, Dr.)
|
Kungliga Tekniska Högskolan
|
IPP |
| 2023-2026 | FW10010248 |
Research and development of innovative LiDAR technology for increasing aviation safety Mgr. Radek Melich Ph.D. |
Honeywell International s.r.o. | IPP |
| 2023-2026 | FW06010306 |
Lens assembly technology for VIS and SWIR Ing. Pavel Psota, Ph.D. |
asphericon s.r.o. | IPP |
| 2023-2026 | 101096317 | V4F
Ing. Miroslav Krůs, Ph.D.
|
Tampere University | IPP |
| 2023-2026 | LM2023045 |
COMPASS – Tokamak for thermonuclear fusion research prof. RNDr. Radomír Pánek, Ph.D. |
IPP | |
| 2023-2026 | LM2023045 | Prague Asterix Laser System
Ing. Miroslav Krůs, Ph.D.
|
IPP | |
| 2023-2028 | TN02000012 | Center of Advanced Nuclear Technology II Ing. Ivan Ďuran, Ph.D. |
University of West Bohemia in Pilsen | IPP |
| 2023-2028 | TN02000069 |
NCK MATCA II (National centre of competence for Materials, Advanced Technologies, Coatings and their Applications) Mgr. Alan Mašláni, Ph.D. |
PI | IPP |
| 2023-2027 | 101120555 |
Cultivating Leaders for Innovative Coatings and Additive Manufacturing Applications (CLICAM)
doc. Ing. Pavel Ctibor, Ph.D.
|
The Alexander Dubček University of Trenčín | IPP, Brno University of Technology |
