The Academy of Sciences of the Czech rebublic - ASCR

Ing. Jiří Matějíček, Ph.D.

 

matejicekj.jpg Ing. Jiří Matějíček, Ph.D.
Scientific Worker
Department of Materials Engineering Place: Main Building, Office: A 011
Tel.:     (+420) 266 053307
Email:   jmatejicipp.cas.cz
Fax:     (+420) 286 586 389 Personal web page

 

 

Research Interests

  • characterization of thermally sprayed deposits
  • process-structure-property relationships
  • residual stresses and mechanical properties
  • nuclear fusion materials

Education

1995-1999 PhD in Materials Science and Engineering
State University of New York, Stony Brook, NY, USA
Processing effects on residual stress and related properties of thermally sprayed coatings
1990-1995 M.S. in Materials Science and Engineering
Czech Technical University, Prague, Czech Republic
The Influence of Plasma Spraying Parameters on Residual Stresses in Deposited Coatings

Research experience

1999 Guest Researcher
National Institute of Standards and Technology, Gaithersburg, MD, USA
residual stress determination by neutron diffraction

Academic Awards

2013 Award for continuing achievements in popularization of physics
Awarded by : Czech Physics Society
Controlled Thermonuclear Fusion for Everybody - 4U (group of authors)
2006 Otto Wichterle Prize
Awarded by : Academy of Sciences of the Czech Republic
1998 Sigma Xi Award
Awarded by : Sigma Xi Scientific Research Society
for Research Excellence
1996 Michael T. Ohr Award
Awarded by : State University of New York, Stony Brook, NY, USA
for Outstanding Teaching Performance

Membership in professional societies, committees, editorial boards, ...

2013 member
10th Conf. on Local Mechanical Properties - scientific board
2011, 2013 member
Rencontres Internationales sur la Projection Thermique - scientific committee
2012- member
Institute of Plasma Physics - Council
2004- member
Editorial Committee - Journal of Thermal Spray Technology
>> more...
2000- member
Best Paper Committee - Journal of Thermal Spray Technology
>> more...
2006-2007 member
EU Task Force for Plasma-Wall Interaction
2002-2006 member
Institute of Plasma Physics - Scientific Council

Supervised students

2013 - now Ing. Lenka Kocmanová
PhD study
Functionally graded materials for fusion applications
2012 - now Bc Veronika Klevarová
Preparation of Master thesis
Interaction of tokamak plasma with selected fusion materials
2015 - now Jakub Veverka
Practical training
Tritium permeation barriers
2008-2012 Monika Vilémová
PhD student
Mechanical properties of hard coatings
2006-2010 Radek Mušálek
PhD student
Evolution of structure and mechanical properties of plasma sprayed materials under various loading
2005-2006 Pavel Hoffmann
Bc student
2003-2004 Pavel Tvaroch
Bc student

Research projects

2014-2018 Multidisciplinary research centre for advanced materials
Co-investigator
Provider: Czech Science Foundation; Project ID: GB14-36566G
2014-2016 Interaction of hydrogen isotopes with candidate fusion materials
Principal investigator
Provider: Czech Science Foundation; Project ID: GA14-12837S
2012-2014 Complex functionally graded materials
Co-investigator
Provider: Czech Science Foundation; Project ID: GAP108/12/1872
2014-2014 Optimization and characterization of tungsten steel joints for the plasma facing wall using different coating technologies including FGM techniques
Principal investigator
Provider: Euratom; Project ID: WP14-ER-01/FZJ-10
2012-2014 Materials for New Millennium
Co-investigator
Provider: Ministry of Education, Youth and Sports of the Czech Republic; Project ID: CZ.1.07/2.3.00/35.0009
2012-2013 Development of W/Fe functionally graded materials
Principal investigator
Provider: Euratom under European Fusion Development Agreement; Project ID: WP12-MAT-HHFM
2013-2013 Investigation of mixed materials surface changes after interaction with laser pulses and plasma streams
Principal investigator
Provider: Euratom under European Fusion Development Agreement; Project ID: WP13-IPH-A01-P3-01
2012-2013 Interaction of tokamak plasma with fusion materials
Principal investigator
Provider: Euratom under European Fusion Development Agreement; Project ID: WP12-PEX-03
2010-2013 Development of stabilized plasma (WSP) torch based technology
Co-investigator
Provider: Ministry of Industry and Trade of the Czech Republic; Project ID: FR-TI2/702
2007-2011 Evolution of structure and mechanical properties of plasma sprayed materials under various loading
Principal investigator
Provider: Ministry of Education, Youth and Sports of the Czech Republic; Project ID: ME 901
2008-2011 Development of tungsten-based functional gradient materials prepared using powder laser deposition
Principal investigator
Provider: Euratom under European Fusion Development Agreement; Project ID: WP08-09-MAT-WWALLOY
2006-2011 Components and technology for fusion reactors
Co-investigator
Provider: Ministry of Industry and Trade of the Czech Republic; Project ID: 2A-1TP1/101
2007-2009 Control of air entrainment process in thermal plasma jets generated by hybrid gas-water torch
Co-investigator
Provider: Grant Agency of the Academy of Sciences; Project ID: KJB100430701
2005-2008 New Materials for Extreme Environments (EXTREMAT)
Principal investigator
Provider: European Union; Project ID: NMP3-CT-2004-500253
2005-2006 Tungsten-Based Coatings for Plasma Facing Components of Fusion Reactors
Principal investigator
Provider: Euratom under European Fusion Development Agreement; Project ID: TW5-TVM-PSW
2002-2006 Abradable Seal Coatings and Claddings for Compressor Applications (Sealcoat)
Principal investigator
Provider: European Union; Project ID: GRD1-2001-40124
2003-2005 Composition changes of ceramic and metallic materials during their plasma spraying
Co-investigator
Provider: Czech Science Foundation; Project ID: GA106/03/0710
2001-2003 Failure processes of thermaly sprayed materials
Co-investigator
Provider: Czech Science Foundation; Project ID: GA106/01/0094
2000-2001 Low-Z Coatings for Plasma Facing Components of Fusion Reactors
Principal investigator
Provider: Euratom under European Fusion Development Agreement; Project ID: DV4/04(TW0)

List of Publications
2015 De Temmerman G., Morgan T.W., van Eden G.G., de Kruif T., Wirtz M., Matějíček J., Chráska T., Pitts R.A., Wright G.M.: Effect of high-flux H/He plasma exposure on tungsten damage due to transient heat loads. Journal of Nuclear Materials 463 [August] (2015) 198-201. [ Abstract ] [ Link ] 
[PLASMA-SURFACE INTERACTIONS 21: International Conference on Plasma-Surface Interactions in Controlled Fusion Devices. Kanazawa, 26.05.2014-30.05.2014]
  Kovářík O., Haušild P., Siegl J., Chráska T., Matějíček J., Pala Z., Boulos M.: The influence of substrate temperature on properties of APS and VPS W coatings. Surface and Coatings Technology 268 [April] (2015) 7-14. [ Abstract ] [ Link ] 
  Matějíček J., Nevrlá B., Vilémová M., Boldyryeva H.: Overview of processing technologies for tungsten-steel composites and FGMs for fusion applications. Nukleonika 60 [2] (2015) 267-273. [ Abstract ] [ Link ] 
[Kudowa Summer School „Towards Fusion Energy“. Kudowa Zdrój, 09.06.2014-13.06.2014]
  Vilémová M., Matějíček J., Nevrlá B., Chernyshova M., Gasior P., Kowalska-Strzeciwilk E., Jäger A.: Heat load and deuterium plasma effects on SPS and WSP tungsten. Nukleonika 60 [2] (2015) 275-283. [ Abstract ] [ Link ] 
[Kudowa Summer School 2014 "Towards Fusion Energy"/12./. Kudowa Zdrój, 09.06.2014-13.06.2014]
  Mušálek R., Vilémová M., Matějíček J., Taltavull C., Lopez Galisteo A.J.: In-situ Observation of Ongoing Microstructural Changes in Functionally Graded Thermal Spray Coating during Mechanical Loading. Proceedings of the Twenty Eighth International Conference on Surface Modification Technologies. India : Valardocs, 2015 - (Sudarshan, T.; Vuoristo, P.; Koivuluoto, H.), s. 571-578 ISBN 978-81-926196-1-3. [ Abstract ] [ Link ] 
[International Conference on Surface Modification Technologies/28./. Tampere (FI), 16.06.2014-18.06.2014]
2014 Kocmanová L., Haušild P., Materna A., Matějíček J.: Numerical Model of Instrumented Iindentation by a Rounded Cone Indenter Using Finite Element Method. Key Engineering Materials. Vol. 606. Zurich : Trans Tech Publications Ltd, 2014 - (Haušíld, P.; Materna, A.; Vilémová, M.), s. 73-76 ISSN 1662-9795. [ Abstract ] [ Link ] 
[International Conference on Local Mechanical Properties, LMP 2013/10./. Kutná Hora (CZ), 06.11.2013-08.11.2013]
  Matějíček J., Holub P.: Laser Remelting of Plasma-Sprayed Tungsten Coatings. Journal of Thermal Spray Technology 23 [4] (2014) 750-754. [ Abstract ] [ Link ] 
  Matějíček J., Mušálek R., Chráska P.: Residual Stresses and Young's Moduli of Plasma Sprayed W+Cu Composites and FGMs Determined by In Situ Curvature Method. Key Engineering Materials. Vol. 606. Zurich : Trans Tech Publications Ltd, 2014 - (Haušíld, P.; Materna, A.; Vilémová, M.), s. 151-154 ISSN 1662-9795. - (606). [ Abstract ] [ Link ] 
[International Conference on Local Mechanical Properties, LMP 2013/10./. Kutná Hora (CZ), 06.11.2013-08.11.2013]
  Matějíček J., Houdková Šimůnková Š., Bláhová O., Pala Z.: The Influence of Spraying Parameters on Stresses and Mechanical Properties of HVOF-Sprayed Co-Cr-W-C Coatings. Key Engineering Materials. Vol. 606. Zurich : Trans Tech Publications Ltd, 2014 - (Haušíld, P.; Materna, A.; Vilémová, M.), s. 171-174 ISSN 1662-9795. [ Abstract ] [ Link ] 
[International Conference on Local Mechanical Properties, LMP 2013/10./. Kutná Hora (CZ), 06.11.2013-08.11.2013]
  Morgan T.W., van Eden G.G., de Kruif T.M., van den Berg A., Matějíček J., Chráska T., De Temmerman G.: ELM-induced melting: assessment of shallow melt layer damage and the power handling capability of tungsten in a linear plasma device. Scripta. - [T159] (2014) 014022-014022. [ Abstract ] [ Link ] 
[International Conference on Plasma-Facing Materials and Components for Fusion Applications/14./. Jülich, 13.05.2013-17.05.2013]
  Nohava J., Mušálek R., Matějíček J., Vilémová M.: A contribution to understanding the results of instrumented indentation on thermal spray coatings - Case study on Al2O3 and stainless steel. Surface and Coatings Technology 240 [February] (2014) 243-249. [ Abstract ] [ Link ] 
  Vilémová M., Nevrlá B., Matějíček J., Mušálek R.: Influence of Preheating Temperature on the Quality of the Interface between Plasma Sprayed Coatings and Substrate. Key Engineering Materials. Vol. 606. Zurich : Trans Tech Publications Ltd, 2014 - (Haušíld, P.; Materna, A.; Vilémová, M.), s. 183-186 ISSN 1662-9795. - (606). [ Abstract ] [ Link ] 
[International Conference on Local Mechanical Properties, LMP 2013/10./. Kutná Hora (CZ), 06.11.2013-08.11.2013]
  Kovářík O., Haušild P., Siegl J., Matějíček J., Davydov V.: Fatigue life of layered metallic and ceramic plasma sprayed coatings. Procedia Materials Science 3 [-] (2014) 586-591. [ Abstract ] [ Link ] 
[European Conference on Fracture (ECF20)/20./. Trondheim, 30.06.2014-04.07.2014]
  Kovářík O., Haušild P., Siegl J., Pala Z., Matějíček J., Davydov V.: The influence of plasma sprayed multilayers of Cr2O3 and Ni10wt%Al on fatigue resistance. Surface and Coatings Technology 251 [-] (2014) 143-150. [ Abstract ] [ Link ] 
  Čech J., Haušild P., Nohava J., Matějíček J.: Určování mechanických vlastností pomocí instrumentované indentace kulovým indentorem. Sborník přednášek studentské vědecké konference JuveMatter 2014. Praha : České vysoké učení technické v Praze, 2014 - (Kunz, J.), s. 76-80 ISBN 978-80-01-05546-5. [ EN ] [ Abstract ] 
[Juvematter 2014. Zámek Nečtiny (CZ), 16.05.2014-19.05.2014]
  Kocmanová L., Materna A., Haušild P., Matějíček J.: MATEMATICKÉ VYJÁDŘENÍ ELASTICKÉHO MODULU PRUŽNOSTI NA ROZHRANÍ DVOU MATERIÁLŮ. Sborník přednášek studentské vědecké konference JuveMatter 2014. Praha : České vysoké učení technické v Praze, 2014 - (Kunz, J.), s. 81-85 ISBN 978-80-01-05546-5. [ EN ] [ Abstract ] 
[Juvematter 2014. Zámek Nečtiny (CZ), 16.05.2014-19.05.2014]
  Naydenkova D., Weinzettl V., Stöckel J., Matějíček J.: On the precision of absolute sensitivity calibration and specifics of spectroscopic quantities interpretation in tokamaks. Applied Optics 53 [34] (2014) 8123-8130. [ Abstract ] [ Link ] 
  Nevrlá B., Vilémová M., Matějíček J.: THERMAL AND MECHANICAL PROPERTIES OF TUNGSTEN COMPACTS PREPARED BY SPS. Proceedings of XIIIth youth symposium on experimental solid mechanics. Praha : Czech Technical University in Prague, Faculty of Transportation Sciences, 2014 - (Kytýř, D.; Zlámal, P.; Růžička, M.), s. 80-83 ISBN 978-80-01-05556-4. [ Abstract ] [ Link ] 
[Youth symposium on experimental solid mechanics /13./. Děčín (CZ), 29.06.2014-02.07.2014]
  Valarezo A., Dwivedi G., Sampath S., Mušálek R., Matějíček J.: Elastic and anelastic behavior of TBCs sprayed at high deposition rates. ITSC 2014 :Interational Thermal Spray Conference and Exposition, Abstracts (including manuscripts on CD-ROM). Düsseldorf : DVS Media GmbH, 2014, s. 13-19. ISBN 978-3-87155-574-9. - (DVS-Berichte. 302). [ Abstract ] 
[ITSC 2014 :Interational Thermal Spray Conference and Exposition. Barcelona (ES), 21.05.2014-23.05.2014]
  Hostaša J., Matějíček J., Nait-Ali B., Smith D.S., Pabst W., Esposito L.: Thermal Properties of Transparent Yb-Doped YAG Ceramics at Elevated Temperatures. Journal of the American Ceramic Society 97 [8] (2014) 2602-2606. [ Abstract ] [ Link ] 
  Pala Z., Mušálek R., Kyncl J., Harcuba P., Stráský J., Kolařík K., Ganev N., Matějíček J.: Effect of boriding time on microstructure and residual stresses in borided highly alloyed X210CR12 steel. Key Engineering Materials. Vol. 606. Zurich : Trans Tech Publications Ltd, 2014, s. 27-30. ISBN 978-303835-062-0. ISSN 1013-9826. - (606). [ Abstract ] [ Link ] 
[International Conference on Local Mechanical Properties, LMP 2013/10./. Kutná Hora (CZ), 06.11.2013-08.11.2013]
  van Eden G.G., Morgan T.W., van der Meiden H.J., Matějíček J., Chráska T., Wirtz M., De Temmerman G.: The effect of high-flux H plasma exposure with simultaneous transient heat loads on tungsten surface damage and power handling. Nuclear Fusion 54 [12] (2014) 123010-123010. [ Abstract ] [ Link ] 
2013 Matějíček J.: Materials for Fusion Applications. Acta polytechnica 53 [2] (2013) 197-212. [ Abstract ] [ Link ] 
[Symposium on Plasma Physics and Technology/25./. Praha, 18.06.2012-21.06.2012]
  Matějíček J., Vilémová M., Mušálek R., Sachr P., Horník J.: The Influence of Interface Characteristics on the Adhesion/Cohesion of Plasma Sprayed Tungsten Coatings. Coatings 3 [2] (2013) 108-125. [ Abstract ] [ Link ] 
  Matějíček J., Kavka T., Bertolissi G., Ctibor P., Vilémová M., Mušálek R., Nevrlá B.: The Role of Spraying Parameters and Inert Gas Shrouding in Hybrid Water-Argon Plasma Spraying of Tungsten and Copper for Nuclear Fusion Applications. Journal of Thermal Spray Technology 22 [5] (2013) 744-755. [ Abstract ] [ Link ] 
  Mušálek R., Pejchal V., Vilémová M., Matějíček J.: Multiple-Approach Evaluation of WSP Coatings Adhesion/Cohesion Strength. Journal of Thermal Spray Technology 22 [2-3] (2013) 221-232. [ Abstract ] [ Link ] 
[International Thermal Spray Conference (ITSC). Houston, 21.05.2012-24.05.2012]
  Rieth M., Dudarev S.L., Gonzalez de Vicente S.M., Aktaa J., Ahlgren T., Antusch S., Armstrong D.E.J., Balden M., Baluc N., Barthe M.-F., Basuki W.W., Battabyal M., Becquart C.S., Blagoeva N., Boldyryeva H., Brinkmann J., Celino M., Ciupinski L., Correia J.B., De Backer A., Domain C., Gaganidze E., García-Rosales C., Gibson J., Gilbert M.R., Giusepponi S., Gludovatz B., Greuner H., Heinola K., Höschen T., Hoffmann A., Holstein A., Koch F., Krauss W., Li H., Lindig S., Linke J., Linsmeier Ch., López-Ruiz P., Maier H., Matějíček J., Mishra T.P., Muhammed M., Muñoz A., Muzyk M., Nordlund K., Nguyen-Manh D., Opschoor J., Ordás N., Palacios Y., Pintsuk G., Pippan R., Reiser J., Riesch J., Roberts S. G., Romaner L., Rosiński M., Sanchez M., Schulmeyer W., Traxler H., Ureña G., van der Laan J.G., Veleva L., Wahlberg S., Walter M., Weber T., Weitkamp T., Wurster S., Yar M.A., You J.H., Zivelonghi A.: Recent progress in research on tungsten materials for nuclear fusion applications in Europe. Journal of Nuclear Materials 432 [1-3] (2013) 482-500. [ Abstract ] [ Link ] 
  Brožek V., Ctibor P., Matějíček J., Mušálek R., Weiss Z.: Tungsten coatings and free standing parts. METAL 2013 Conference Proceedings: 22nd International Conference on Metallurgy and Materials. Ostrava : Tanger spol. s r.o, 2013, 1445-1-14445-6. ISBN 978-80-87294-39-0. [ Abstract ] [ Link ] 
[METAL 2013: International Conference on Metallurgy and Materials/22./. Brno (CZ), 15.05.2013-17.05.2013]
  Mušálek R., Dlabáček Z., Vilémová M., Pala Z., Matějíček J., Chráska T.: Preparation of multiphase materials with spark plasma sintering. METAL 2013 Conference Proceedings: 22nd International Conference on Metallurgy and Materials. Ostrava : Tanger spol. s r.o, 2013, s. 1625-1625. ISBN 978-80-87294-39-0. [ Abstract ] [ Link ] 
[METAL 2013: International Conference on Metallurgy and Materials/22./. Brno (CZ), 15.05.2013-17.05.2013]
  Rieth M., Dudarev S.L., Gonzalez de Vicente S.M., Aktaa J., Ahlgren T., Antusch S., Armstrong D.E.J., Balden M., Baluc N., Barthe M.-F., Basuki W.W., Battabyal M., Becquart C.S., Blagoeva D., Boldyryeva H., Brinkmann J., Celino M., Ciupinski L., Correia J.B., De Backer A., Domain C., Gaganidze E., García-Rosales C., Gibson J., Gilbert M.R., Giusepponi S., Gludovatz B., Greuner H., Heinola K., Höschen T., Hoffmann A., Holstein N., Koch F., Krauss W., Li H., Lindig S., Linke J., Linsmeier Ch., López-Ruiz P., Maier H., Matějíček J., Mishra T.P., Muhammed M., Munoz A., Muzyk M., Nordlund K., Nguyen-Manh D., Opschoor J., Ordás N., Palacios T., Pintsuk G., Pippan R., Reiser J., Riesch J., Roberts S. G., Romaner L., Rosiński M., Sanchez M., Schulmeyer W., Traxler H., Urena A., van der Laan J.G., Veleva L., Wahlberg S., Walter M., Weber T., Weitkamp T., Wurster S., Yar M.A., You J.H., Zivelonghi A.: A brief summary of the progress on the EFDA tungsten materials program. Journal of Nuclear Materials 442 [1-3] (2013) S173-S180. [ Abstract ] [ Link ] 
[Fifteenth International Conference on Fusion Reactor Materials. Charleston, South Carolina, 16.10.2011-22.10.2011]
  Sedmák P., Seiner H., Sedlák P., Landa M., Mušálek R., Matějíček J.: Application of resonant ultrasound spectroscopy to determine elastic constants of plasma-sprayed coatings with high internal friction. Surface and Coatings Technology 232 [October] (2013) 747-757. [ Abstract ] [ Link ] 
  Mlynář J., Žáček F., Weinzettl V., Kulhánek P., Matějíček J., Koláček K.: Řízená termojaderná fúze pro každého – 4U. Praha : projekt Materialy pro nove tisicileti, 2013. 238 s. - (Svět energie). ISBN 978-80-260-4785-8 [ EN ] 
2012 Kavka T., Matějíček J., Ctibor P., Hrabovský M.: Spraying of metallic powders by hybrid gas/water torch and the effects of inert gas shrouding. Journal of Thermal Spray Technology 21 [3-4] (2012) 695-705. [ Abstract ] [ Link ] 
  Vilémová M., Matějíček J., Mušálek R., Nohava J.: Application of Structure-Based Models of Mechanical and Thermal Properties on Plasma Sprayed Coatings. Journal of Thermal Spray Technology 21 [3-4] (2012) 372-382. [ Abstract ] [ Link ] 
  Vilémová M., Nevrlá B., Matějíček J.: Mechanical and thermal properties of tungsten composite coatings. Vrstvy a povlaky 2012. Trenčín : LISS a.s, 2012 - (Šošovičková, J.), s. 135-140 ISBN 978-80-970824-1-3. [ Abstract ] [ Link ] 
[Vrstvy a Povlaky 2012. Rožnov pod Radhoštěm (CZ), 08.10.2012-09.10.2012]
  Mušálek R., Vilémová M., Matějíček J., Pejchal V.: Multiple-Approach Evaluation of WSP Coatings Adhesion/Cohesion Strength. Thermal Spray 2012: Proceedings from the International Thermal Spray Conference and Exposition. Materials Park, Ohio : ASM International, 2012 - (Lima, R.; Agarwal, A.; Hyland, M.; Lau, Y.; Li, C.; McDonald, A.; Toma, F.), s. 746-751 ISBN N. - (ASM International). [ Abstract ] [ Link ] 
[International Thermal Spray Conference 2012 (ITSC 2012). Houston (US), 21.05.2012-24.05.2012]
  Neufuss K., Brožek V., Matějíček J.: Ochranný povlak na bázi wolframu a způsob jeho přípravy. 2012. Vlastník: Ústav fyziky plazmatu AV ČR, v.v.i. Datum udělení patentu: 25.07.2012. Číslo patentu: 303411 [ EN ] [ Abstract ] [ Link ] 
  Mušálek R., Pejchal V., Pala Z., Vilémová M., Matějíček J.: Adhezní/kohezní zkoušení žárových nástřiků při namáhání smykem. Vrstvy a povlaky 2012. Trenčín : LISS a.s, 2012 - (Šošovičková, J.), s. 69-74 ISBN 978-80-970824-1-3. [ EN ] [ Abstract ] [ Link ] 
[Vrstvy a Povlaky 2012. Rožnov pod Radhoštěm (CZ), 08.10.2012-09.10.2012]
  Ferraris M., Casalegno V., Rizzo S., Salvo M., Van Staveren T.O., Matějíček J.: Effects of neutron irradiation on glass ceramics as pressure-less joining materials for SiC based components for nuclear applications. Journal of Nuclear Materials 429 [1-3] (2012) 166-172. [ Abstract ] [ Link ] 
  Matějíček J., Boldyryeva H., Brožek V., Čižmárová E., Pala Z.: Tungsten-Steel Composites and FGMs Produced by Hot Pressing. METAL 2012 Conference Proceedings. Ostrava : TANGER Ltd. Ostrava, 2012, s. 177-177. ISBN 978-80-87294-31-4. [ Abstract ] 
[International Conference on Metallurgy and Materials METAL 2012/21./. Brno (CZ), 23.05.2012-25.05.2012]
  Gregorová E., Pabst W., Sofer Z., Jankovský O., Matějíček J.: Porous Alumina and Zirconia Ceramics With Tailored Thermal Conductivity. Journal of Physics: Conference Series 395 [1] (2012) 012022-012022. [ Abstract ] [ Link ] 
[European Thermal Sciences Conference (Eurotherm)/6./. Poitiers, 04.09.2012-07.09.2012]
2011 Kavka T., Matějíček J., Ctibor P., Mašláni A., Hrabovský M.: Plasma Spraying of Copper by Hybrid Water-Gas DC Arc Plasma Torch. Journal of Thermal Spray Technology 20 [4] (2011) 760-774. [ Link ] 
  Hostaša J., Pabst W., Matějíček J., Gregorová E., Malangré D.: Thermophysical properties and elastic moduli of alumina-zirconia composite ceramics. Proceedings of the 12th Conference of the European Ceramic Society – ECerS XII. Stockholm : City Conference Centre(CCC), 2011. S. 722-722. [ Abstract ] 
[Conference of the European Ceramic Society (ECerS XII)/12th./. Stockholm (SE), 19.06.2011-23.06.2011]
  Vilémová M., Matějíček J., Mušálek R.: Application of structure-based models of mechanical and thermal properties on plasma sprayed coatings. International Thermal Spray Conference (ITSC 2011). Düsseldorf : DSV-German Welding Society, 2011. S. 635-643. ISBN 978-3-87155-268-7.
[International Thermal Spray Conference 2011(ITSC2011). Hamburk (DE), 27.09.2011-29.09.2011]
  Vilémová M., Siegl J., Matějíček J., Mušálek R.: Effect of the grit blasting exposure time on the adhesion of Al2O3 and 316L coatings. International Thermal Spray Conference (ITSC 2011). Düsseldorf : DSV-German Welding Society, 2011. S. 1001-1006. ISBN 978-3-87155-268-7.
[International Thermal Spray Conference 2011(ITSC2011).. Hamburg (DE), 27.09.2011-29.09.2011]
  Pejchal V., Mušálek R., Matějíček J.: Pin test – an approach to adhesion/cohesion assesment of thermal spray coatings. Vrstvy a povlaky 2011. Trenčín : LISS,a.s, 2011 - (Šošovičková, J.) S. 135-140. ISBN 978-80-970824-0-6. [ Link ] 
[Vrstvy a Povlaky 2011. Rožnov pod Radhoštěm (CZ), 17.10.2011-18.10.2011]
  Mušálek R., Vilémová M., Pejchal V., Matějíček J.: Studie relevantnosti stanovení přilnavosti v tahu pro WSP nástřiky. Vrstvy a povlaky 2011. Trenčín : LISS,a.s, 2011 - (Šošovičková, J.) S. 117-122. ISBN 978-80-970824-0-6. [ EN ] 
[Vrstvy a Povlaky 2011. Rožnov pod Radhoštěm (CZ), 17.10.2011-18.10.2011]
  Kavka T., Matějíček J., Ctibor P., Hrabovský M.: Spraying of metallic powders by hybrid gas/water torch and the effects of inert gas shrouding. DVS Berichte, vol. 276( Proceedings of the International thermal spray conference 2011). Düsseldorf : DVS Media GmbH, 2011. S. 1373-1380. ISBN 978-3-87155-268-7. - (ITSC. 2011. 276). [ Abstract ] 
[International Thermal Spray Conference 2011(ITSC2011).. Hamburg (DE), 27.09.2011-29.09.2011]
  Hostaša J., Pabst W., Matějíček J.: Thermal Conductivity of Al2O3–ZrO2 Composite Ceramics. Journal of the American Ceramic Society 94 [12] (2011) 4404-4409. [ Abstract ] [ Link ] 
2010 Mušálek R., Matějíček J., Pejchal V., Mari E., Valarezo A., Sampath S.: Influence of Pores and Cracks Morphology on Mechanical Behavior of Thermally Sprayed Ceramics. ITSC 2010 – International Thermal Spray Conference & Exposition: Conference Proceedings. Düsseldorf : DVS Media GmbH, 2010. S. 723-728. ISBN 978-3-87155-590-9. - (ITSC). [ Abstract ] 
[ITSC 2010 – International Thermal Spray Conference & Exposition. Singapore (SG), 03.05.2010-05.05.2010]
  Mušálek R., Matějíček J., Vilémová M., Kovářík O.: Non-Linear Mechanical Behavior of Plasma Sprayed Alumina Under Mechanical and Thermal Loading. Journal of Thermal Spray Technology 19 [1-2] (2010) 422-428. [ Abstract ] [ Link ] 
[International Thermal Spray Conference (ITSC 2009):Expanding Thermal Spray Performance to New Markets and Applications. Las Vegas, NV, 04.05.2009-07.05.2009]
  Luzin V., Matějíček J., Gnäupel-Herold T.: Through-thickness Residual Stress Measurement by Neutron Diffraction in Cu+W Plasma Spray Coatings. Materials Science Forum 652 [652] (2010) 50-56. [ Abstract ] [ Link ] 
[International Conference on Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation/5th./. Mito, 10.11.2009-12.11.2009]
  Matějíček J., Chráska P.: Development of advanced coatings for ITER and future fusion devices. Advances in Science and Technology 66 (2010) 47-65. [ Abstract ] [ Link ] 
[[INTERNATIONAL CERAMICS CONGRESS/12th./. Montecatini Terme (IT), 06.06.2010-11.06.2010]]
  Mušálek R., Kovářík O., Matějíček J.: In-situ observation of crack propagation in thermally sprayed coatings. Surface and Coatings Technology 205 [7] (2010) 1807-1811. [ Abstract ] [ Link ] 
  Mušálek R., Vilémová M., Matějíček J.: Bonded Interface Technique for Failure Analysis of Thermal Spray Coatings. Vrstvy a povlaky 2010. Trenčín : LISS a.s, 2010 - (Šošovičková, J.) S. 63-68. ISBN 978-80-970514-2-6. [ Abstract ] 
[Vrstvy a povlaky 2010. Rožnov pod Radhoštěm (CZ), 04.10.2010-05.10.2010]
  Pejchal V., Mušálek R., Matějíček J.: Comparison of WSP and HVOF Sprayed Alumina Coatings Behavior during Mechanical Loading. Vrstvy a povlaky 2010. Trenčín : LISS a.s, 2010 - (Šošovičková, J.) S. 69-74. ISBN 978-80-970514-2-6. [ Abstract ] 
[Vrstvy a povlaky 2010. Rožnov pod Radhoštěm (CZ), 04.10.2010-05.10.2010]
  Vilémová M., Matějíček J., Choi B.: INVESTIGATION OF RESIDUAL STRESS STATE INFLUENCE ON THE MECHANICAL PROPERTIES OF WC-12%Co COATINGS. Vrstvy a povlaky 2010. Trenčín : LISS a.s, 2010 - (Šošovičková, J.) S. 95-100. ISBN 978-80-970514-2-6. [ Abstract ] 
[Vrstvy a povlaky 2010. Rožnov pod Radhoštěm (CZ), 04.10.2010-05.10.2010]
2009 Matějíček J.: Extremat - New Materials for Extreme Environments. research*eu focus - [4] (2009) 25-25. [ Abstract ] 
  Matějíček J., Iždinský K., Vondrouš P.: Methods of Increasing Thermal Conductivity of Plasma Sprayed Tungsten-Based Coatings. Acoustic Emission Testing - (Pullin, R.) 59 [-] (2009) 82-86. [ Abstract ] [ Link ] 
[International Conference on New Materials for Extreme Environments/1st./. San Sebastian, 02.06.2008-04.06.2008]
  Mušálek R., Matějíček J., Vilémová M., Kovářík O.: Non-Linear Mechanical Behavior of Plasma Sprayed Coatings under Mechanical and Thermal Loading. Expanding Thermal Spray Performance to New Markets and Applications: Proceedings of the 2009 International Thermal Spray Conference. Materials Park, Ohio, USA : International Thermal Spray Association, 2009 - (Marple, B.; Hyland, M.; Lau, Y.; Li, C.; Lima, R.; Montavon, G.) S. 914-919. ISBN 978-1-61503-004-0. [ Abstract ] 
[International Thermal Spray Conference ,ITSC 2009. Las Vegas (US), 04.05.2009-07.05.2009]
  Matějíček J., Boldyryeva H.: Processing and temperature-dependent properties of plasma-sprayed tungsten–stainless steel composites. Physica Scripta T138 [014041] (2009) 1-4. [ Abstract ] [ Link ] 
[International Workshop on Plasma-Facing Materials and Components for Fusion Applications/12th./. Jülich, 11.05.2009-14.05.2009]
2008 Matějíček J., Zahálka F., Bensch J., Chi W., Sedláček J.: Copper-Tungsten Composites Sprayed by HVOF. Journal of Thermal Spray Technology 17 [2] (2008) 177-180. [ Abstract ] [ Link ] 
  Mušálek R., Matějíček J.: Influence of Powder Injection on Mechanical Properties of Plasma Sprayed Copper and Tungsten Coatings. Proceedings of Workshop 2008. Prague : CTU Publishing House, 2008. S. 230-231. ISBN 978-80-01-04016-4. - (12. 1). [ Abstract ] [ Link ] 
[Workshop 2008. Praha (CZ), 18.02.2008-22.02.2008]
  Matějíček J., Mušálek R.: Optimization of Powder Injection for Plasma Spraying of Tungsten and Copper. Vrstvy a povlaky 2008. Rožnov pod Radhoštěm : LISS, a.s., 2008. S. 113-116. ISBN 978-80-969310-7-1. [ Abstract ] 
[Vrstvy a povlaky 2008. Rožnov pod Radhoštěm (CZ), 29.09.2008-30.09.2008]
  Mušálek R., Kovářík O., Matějíček J.: Prediction of Mechanical Properties of Thermally Sprayed Coatings Using Finite Element Method. Vrstvy a povlaky 2008. Rožnov pod Radhoštěm : LISS, a.s., 2008. S. 117-122. ISBN 978-80-969310-7-1. [ Abstract ] 
[Vrstvy a povlaky 2008. Rožnov pod Radhoštěm (CZ), 29.09.2008-30.09.2008]
  Matějíček J., Mušálek R.: Processing and properties of plasma sprayed W+Cu composites. Thermal spray crossing borders : ITSC 2008 - International Thermal Spray Conference & Exposition. Düsseldorf : DVS Verlag, 2008. S. 1412-1417. ISBN 978-3-87155-979-2. [ Abstract ] 
[International Thermal Spray Conference. Maastricht (NL), 02.06.2008-04.06.2008]
2007 Brožek V., Matějíček J., Neufuss K.: Behavior of tungsten carbide in water stabilized plasma. Powder Metallurgy Progress 7 [4] (2007) 213-220. [ Abstract ] 
  Brožek V., Ctibor P., Matějíček J., Rohan P., Janča J.: Consolidation of tungsten disilicide by plasma spraying. Acta Technica CSAV 52 [3] (2007) 311-320. [ Abstract ] 
  Brožek V., Ctibor P., Matějíček J., Rohan P., Janča J.: Consolidation of Tungsten Disilicide WSi2 by Plasma Spraying. EURO PM 2007 Proceedings. Shrewsbury, UK : EPMA Shrewsbury, 2007. S. 431-436. ISBN 978-1-899072-30-9. [ Abstract ] 
[International Powder Metallurgy Congress & Exhibition EURO PM 2007. Toulouse (FR), 15.10.2007-17.10.2007]
  Matějíček J., Chráska P., Linke J.: Thermal Spray Coatings for Fusion Applications — Review. Journal of Thermal Spray Technology 16 [1] (2007) 64-83. [ Abstract ] [ DOI ] 
  Brožek V., Matějíček J., Neufuss K.: Wolframové filtry. Proceedings 16th International Metallurgical & Material Conference. Ostrava : Tanger s.r.o, 2007. S. 118-123. ISBN 978-80-86840-33-8. [ EN ] [ Abstract ] 
[International Metallurgical & Material Conference/16th./. Hradec nad Moravicí (CZ), 22.05.2007-24.05.2007]
2006 Matějíček J., Kolman B., Dubský J., Neufuss K., Hopkins N., Zwick J.: Alternative methods for determination of composition and porosity in abradable materials. Materials Characterization 57 [2] (2006) 17-29. [ Abstract ] [ Link ] 
  Margadant N., Neuenschwander J., Stauss S., Kaps H., Kulkarni A., Matějíček J., Rössler G.: Impact of probing volume from different mechanical measurement methods on elastic properties of thermally sprayed Ni-based coatings on a mesoscopic scale. Surface and Coatings Technology 200 [8] (2006) 2805-2820. [ Abstract ] [ Link ] 
  Bobzin K., Lugscheider E., Zwick J., Ernst F., Sporer D., Hopkins N., Hertter M., Matějíček J.: Microstructure and Properties of New Abradable Seal Coatings for Compressor Applications. International Thermal Spray Conference. Materials Park, OH, USA : ASM International, 2006 - (Marple, B.; Hyland, M.; Lau, Y.; Lima, R.; Voyer, L.) s. 11611-11615. [ Abstract ] 
[International Thermal Spray Conference. Seattle (US), 15.05.2006-17.05.2006]
  Gnaeupel-Herold T., Prask H. J., Barker J., Biancaniello F.S., Jiggetts R.D., Matějíček J.: Microstructure, mechanical properties, and adhesion in IN625 air plasma sprayed coatings. Materials Science and Engineering A-Structural materials 421 [1-2] (2006) 77-85. [ Abstract ] [ Link ] 
  Hofmann P., Matějíček J.: Modifikace tepelné vodivosti plazmových nástřiků na bázi wolframu. Proceedings 5th Conference on Coatings and Layers. Rožnov pod Radhoštěm : -, 2006. s. 168-172. ISBN 80-969310-2-4. [ EN ] [ Abstract ] 
[Conference on Coatings and Layers (Vrstvy a povlaky 2006)/5th./. Rožnov pod Radhoštěm (CZ), 10.10.2006-11.10.2006]
  Matějíček J., Weinzettl V., Dufková E., Piffl V., Peřina V.: Plasma Sprayed Tungsten-based Coatings and their Usage in Edge Plasma Region of Tokamaks. Acta Technica CSAV 51 [2] (2006) 179-191. [ Abstract ] 
  Brožek V., Matějíček J., Neufuss K.: Plazmová depozice cermetů s wolframovou matricí. METAL 2006. Ostrava : Tanger, 2006. s. 86-91. ISBN 80-86840-18-2. [ EN ] [ Abstract ] [ Link ] 
[International Metallurgical & Materials Conference /15th./. Hradec nad Moravicí (CZ), 23.05.2006-25.05.2006]
  Brožek V., Matějíček J., Neufuss K.: Preparation of tungsten filters and membranes. Proceedings 9th International Conference on Inorganic Membranes 9ICIM. Lillehammer - Norway : Ed.Bredesen & Raeder, SINTEF, Norway, 2006. s. 637-640. ISBN 82-14-04026-5. [ Abstract ] 
[International Conference on Inorganic Membranes 9ICIM /9th./. Lillehammer, Norway (NO), 25.06.2006-29.06.2006]
  Brožek V., Matějíček J., Neufuss K.: Wolframové a wolframkarbidové filtry a membrány. Chemické listy 100 [8] (2006) 8. [ EN ] [ Abstract ] 
[Sjezd chemických společností/58./. Ústí nad Labem, 4.9.2006-8.9.2006]
2005 Weinzettl V., Piffl V., Matějíček J., Dufková E., Zajac J., Peřina V.: BIASING EXPERIMENTS WITH SOLID AND POROUS ELECTRODES. Europhysics Conference Abstracts ECA. Tarragona : EPS, 2005 - (van Milligen, B.; Hidalgo, C.) P-4.006. ISBN 2-914771-24-X. - (29C). [ Abstract ] [ Link ] 
[EPS Plasma Physics Conference /32nd./. Tarragona (ES), 27.06.2005-01.07.2005]
  Matějíček J., Neufuss K., Kolman D., Chumak O., Brožek V.: Development and Properties of Tungsten-Based Coatings Sprayed by WSP(R). Thermal Spray connects: Explore its surfacing potential!. Düsseldorf : DVS-Verlag, 2005 - (Lugscheider, E.) s. 634-640. [ Abstract ] 
[International Thermal Spray Conference. Basel (CH), 2.5.2005-4.5.2005]
  Brožek V., Matějíček J., Šrank Z., Mastný L., Janča J.: Fotokatalytická aktivita plazmově zpracovaných titanových prekurzorů. Sborník přednášek 14. Konference s mezinárodní účastí APROCHEM 2005,. Praha : PetroChemEng, 2005. s. 439-444. ISBN 80-02-01755-2. [ EN ] [ Abstract ] 
[Aprochem 2005 /14./. Milovy (CZ), 24.10.2005-26.10.2005]
  Brožek V., Matějíček J., Šrank Z., Mastný L., Janča J.: Fotokatalytická aktivita titanových prekurzorů zpracovaných v nízkoteplotním plazmatu Fotokatalytická aktivita titanových prekurzorů zpracovaných v nízkoteplotním plazmatu. Sborník CHISA 2005 , 52. Praha : Procesní inženýrství Praha, 2005 - (Novosad, J.) s. 197-202. ISBN 80-86059-42-1. [ EN ] [ Abstract ] 
[CHISA 2005. Srní (CZ), 17.10.2005-20.10.2005]
  Matějíček J., Koza Y., Weinzettl V.: Plasma sprayed tungsten-based coatings and their performance under fusion relevant conditions. Fusion Engineering and Design 75-79 (2005) 395-399. [ Abstract ] [ DOI ] 
[Symposium of Fusion Technology/23rd./. Venice, 20.9.2004-24.9.2004]
  Brožek V., Matějíček J., Neufuss K.: Plazmová depozice wolframových povlaků. Sborník přednášek METAL 2005. Ostrava : Tanger s.r.o. Ostrava, 2005. s. 89-95. ISBN 80-86840-13-1. [ EN ] [ Abstract ] 
[International Metallurgical and Materials Conference/14th./. Hradec nad Moravicí (CZ), 24.05.2005-26.05.2005]
  Weinzettl V., Piffl V., Matějíček J., Dufková E., Zajac J., Dejarnac R., Peřina V.: THE EFFECT OF THE USE OF DIFFERENT ELECTRODE MATERIALS FOR EDGE-PLASMA BIASING ON PLASMA DENSITY AND FLOATING POTENTIAL MODIFICATIONS. Czechoslovak Journal of Physics 55 [12] (2005) 1607-1614. [ Abstract ] 
[Electric Fields, Structures and Relaxation in Edge Plasmas,. Tarragona, 3.7.2005-4.7.2005]
  Matějíček J., Chumak O., Konrád M., Oberste-Berghaus J., Lamontagne M.: The Influence of Spraying Parameters on In-Flight Characteristics of Tungsten Particles and the Resulting Splats Sprayed by Hybrid Water-Gas Stabilized Plasma Torch. Thermal Spray connects: Explore its surfacing potential!. Düsseldorf : DVS-Verlag, 2005 - (Lugscheider, E.) s. 594-599. [ Abstract ] 
[International Thermal Spray Conference. Basel (CH), 2.5.2005-4.5.2005]
  Brožek V., Matějíček J., Neufuss K.: Zpracování karbidu wolframu v nízkoteplotním plazmatu. Sborník přednášek 14. Konference s mezinárodní účastí APROCHEM 2005,. Praha : PetroChemEng, 2005. s. 449-454. ISBN 80-02-01755-2. [ EN ] [ Abstract ] 
[Aprochem 2005 /14./. Milovy (CZ), 24.10.2005-26.10.2005]
2004 Brožek V., Flemr V., Matějíček J., Neufuss K.: Chování karbidu wolframu při plazmové depozici. Proceedings METAL 2004. Ostrava : Tanger s.r.o., Ostrava, 2004. s. 78-79. ISBN 80-85988-95-X. [ EN ] [ Abstract ] 
[International Metallurgical and Materials Conference/13th./. Hrádek nad Moravicí (CZ), 17.05.2004-20.05.2004]
  Matějíček J., Ilavský J.: Patents - Overlooked Source of Information. Journal of Thermal Spray Technology 13 [4] (2004) 473-476. [ Abstract ] [ DOI ] 
  Matějíček J., Brand P. C., Drews A. R., Krause A., Lowe-Ma C.: Residual stresses in cold-coiled helical compression springs for automotive suspensions measured by neutron diffraction. Materials Science and Engineering A-Structural materials 367 [1-2] (2004) 306-311. [ Abstract ] [ Link ] 
  Matějíček J., Sampath S., Jiang X., Prchlík L., Kulkarni A., Vaidya A.: Role of thermal spray processing method on the microstructure, residual stress and properties of coatings: an integrated study for Ni-5 wt.%Al bond coats. Materials Science and Engineering A-Structural materials 364 [1-2] (2004) 216-231. [ Abstract ] 
  Sampath S., Jiang X., Matějíček J., Prchlík L., Kulkarni A., Vaidya A.: Role of thermal spray processing method on the microstructure, residual stress and properties of coatings:an integrated study for Ni-5wt.% Al bond coats. Materials Science and Engineering A-Structural materials 364 [1-2] (2004) 216-231. [ Abstract ] [ Link ] 
  Rohan P., Neufuss K., Matějíček J., Dubský J., Prchlík L., Holzgartner C.: Thermal and mechanical properties of cordierite, mullite and steatite produced by plasma spraying. Ceramics International 30 [4] (2004) 597-603. [ Abstract ] [ Link ] 
2003 Sampath S., Jiang X., Kulkarni A., Matějíček J., Gilmore D. L., Neiser R. A.: Development of Process for Plasma Spray:Case Study for Molybdenum. Materials Science and Engineering A-Structural materials 348 [1-2] (2003) 54-66. [ Abstract ] [ Link ] 
  Matějíček J., Sampath S., Gilmore D., Neiser R.: In situ Measurement of Residual Stresses and Elastic Moduli in Thermal Sprayed Coatings.Part 2: Processing Effects on Properties of Mo Coatings. Acta Materialia 51 [3] (2003) 873-885. [ Abstract ] [ Link ] 
  Matějíček J., Sampath S.: In situ Measurements of Residual Stresses and Elelastic Moduli in Thermal Sprayed Coatings. Part 1: Apparatus and Analysis. Acta Materialia 51 [3] (2003) 863-872. [ Abstract ] [ Link ] 
  Pintsuk G., Döring J.-E., Hohenauer W., Linke J., Matějíček J., Smid I., Tietz F.: Microstructural and mechanical properties of plasma sprayed W/Cu-graded composites for extreme thermal conditions. Proceedings 2003 World Congress on Powder Metallurgy & Particulate Materials. Princeton, NJ, US, 2003. s. 6.107-6.118. [ Abstract ] 
[World Congress on Powder Metallurgy & Particulate Materials /2003./. Las Vegas, Nevada (US), 08.06.2003-12.06.2003]
2002 Sampath S., Matějíček J.: Method and Apparatus for Determining Process-Induced Stresses and Modulus of Coatings by in-situ Measurement. 20000303. Datum udělení patentu: 20021112. 12 s. 6478875 [ Link ]&nnbsp;
  Nanobashvili S., Matějíček J., Žáček F., Stöckel J., Chráska P., Brožek V.: Plasma Sprayed Coatings for RF Wave Absorption. Journal of Nuclear Materials 307-311 [-] (2002) 1334-1338. [ Abstract ] [ Link ] 
  Matějíček J., Nanobashvili S., Ctibor P., Brožek V., Neufuss K., Chráska P.: Properties of Boron Carbide Coatings and Free-Standing Parts Prepared by WSP(r). Materials Week 2001. Frankfurt : WerkstoffInformationsgesselschaft, 2002. s. článek č.914. ISBN 3-88355-302-6. [ Abstract ] 
[Materials Week 2001.. Mnichov (DE), 01.10.2001-04.10.2001]
  Dubský J., Matějíček J., Prask H. J., Gnäupel-Herold T.: Residual and applied stresses in plasma Cr2O3 coatings. Materials Science Forum, Vol. 404-407, 2002, 419-424 ISBN 0-87849-900-8. [ Abstract ] [ Link ] 
[European Conference on Residual Stresses/6th./. Coimbra (PT), 10.07.2002-12.07.2002]
  Dubský J., Matějíček J.: Residual and applied stresses in thermally sprayed metallic and ceramic coatings. Proceedings of the International Thermal Spray Conference. Düsseldorf : DVS, 2002 - (Lugscheider, E.; Berndt, C.) s. 606-609. ISBN 3-87155-783-8. [ Abstract ] 
[International Thermal Spray Conference.. Essen (DE), 04.03.2002-06.03.2002]
  Matějíček J., Sampath S., Gnaupel-Herold T., Prask H. J.: Residual Stress in Sprayed Ni+5% Al Coatings Determined by Neutron Diffraction. Applied Physics A - Materials Science & Processing 74 [supplement 8] (2002) S1692-S1694. [ Abstract ] [ DOI ] 
  Dubský J., Matějíček J.: Stresses and Young's moduli in thermally sprayed coatings. International Thermal Spray Conference Proceedings. Düsseldorf : DVS, 2002 - (Lugscheider, E.; Berndt, C.) s. 606-609. ISBN 3-87155-783-8. [ Abstract ] 
[International Thermal Spray Conference.. Essen (DE), 04.03.2002-06.03.2002]
  Dubský J., Prask H. J., Matějíček J., Gnäupel-Herold T.: Stresses in plasma-sprayed Cr2O3 coatings measured by neutron diffraction. Applied Physics A - Materials Science & Processing 75 [-] (2002) 1-3. [ Abstract ] [ DOI ] 
[International Conference on Neutron Scattreing.. Munich, 09.08.2001-13.08.2002]
  Matějíček J., Neufuss K., Ctibor P., Rohan P., Dubský J., Chráska P., Brožek V.: WSP-Sprayed Boron Carbide Coatings for Fusion Applications. Proceedings of International Thermal Spray Conference 2002. Düsseldorf : DVS, 2002 - (Lugscheider, E.; Berndt, C.) s. 1-5. ISBN 3-87155-783-8. [ Abstract ] 
[International Thermal Spray Conference.. Essen (DE), 04.03.2002-06.03.2002]
2001 Matějíček J., Sampath S.: Intrinsic residual stresses in single splats produced by thermal spray processes. Acta Materialia 49 [11] (2001) 1993-1999. [ Abstract ] [ Link ] 
  Keller T., Wagner W., Ilavský J., Margadant N., Siegmann S., Písačka J., Matějíček J., Barbezat G., Fiala P., Pirling T.: Microstructural Studies of Thermally Sprayed Deposits by Neutron Scattering. Proceedings of the Conference Thermal Spray 2001: New Surfaces for a New Millenium. Materials Park, Ohio : ASM International, 2001 - (Berndt, C.; Khor, K.; Lugscheider, E.) s. 653-660. [ Abstract ] 
[International Thermal Spray Conference: ITSC 2001. Singapore (US), 28.05.2001-30.05.2001]
  Keller T., Wagner W., Ilavský J., Margadant N., Siegmann S., Písačka J., Matějíček J., Barbezat G., Fiala P., Pirling T.: Microstructural Studies of Thermally Sprayed Deposits by Neutron Scattering. Thermal Spray 2001:New Surfaces for a New Millenium. Materials Park, OH, US : ASM International, 2001 - (Berndt, C.; Khor, K.; Lugscheider, E.) s. 653-660. ISBN 0-87170-737-3. [ Abstract ] 
[Thermal Spray 2001:New Surfaces for a New Millenium.. Singapore (SG), 28.05.2001-30.05.2001]
  Matějíček J., Ilavský J., Gnaupel-Herold T.: Neutron Scattering in Studies of Complex Anisotropic Microstructures. Proceedings 3rd International Conference Materials Structure and Micromechanics of Fracture. Brno : Vutium Brno, 2001. s. 502-516. ISBN 80-214189-2-3. [ Abstract ] 
[International Conference on Materials structure and Micromechanics of Fracture /3./. Brno (CZ), 27.06.2001-29.06.2001]
  Keller T., Pirling T., Margadant N., Wagner W., Siegmann S., Matějíček J.: Residual Stress Measurements in Thermally Sprayed Metallic Coatings. Proceedings ILL Millenium Symposium. Grenoble : ILL, 2001. s. 261-263. [ Abstract ] 
[ILL Millenium Symposium. Grenoble (FR), 06.04.2001-07.04.2001]
  Keller T., Pirling T., Margadant N., Wagner W., Siegmann S., Matějíček J.: Residual Stress Measurements in Thermally Sprayed Metallic Coatings. Proceedings ILL Millenium Symposium & European User Meeting. Grenoble : Institute LaueLangevin, 2001. s. 261-263. [ Abstract ] 
[ILL Millenium Symposium. Grenoble (FR), 06.04.2001-07.04.2001]
  Prchlik L., Matějíček J., Vaidya A., Sampath S.: Role of Imperfections and Intrinsic Stresses on the Thermo-mechanical and Tribological Properties of Thermal Sprayed Metal-Ceramic FGMs. Ceramic Transactions. Materials Park : The American Ceramics Society, 2001 - (Trumble, K.; Bowman, K.; Reimanis, I.; Sampath, S.) s. 135-141. ISBN 15-749811-0-2. - (114). [ Abstract ] 
[International Conference on Functionally Graded Materials/6th./. Estes Park, Colorado (US), 00.00.2000-00.00.2000]
2000 Thompson J. A., Matějíček J., Clyne T. W.: Modelling and Neutron Diffraction Measurements of Stresses in Sprayed TBCs. 9th International Symposium on Superalloys. Warrendale, PA : TSM, 2000 - (Green, K.; Pollock, T.; Kissinger, R.) s. 639-647. ISBN 0-87339-477-1. [ Abstract ] 
[International Symposium on Superalloys/9th./. Seven Springs, PA (US), 17.09.2000-21.09.2000]
  Gnaeupel-Herold T., Haeffner D. R., Prask H. J., Matějíček J.: Residual Stress Determination by Whole Pattern Analysis-Application to Synchrotron HEXRD Measurements on Thermal Sprayed Coatings. Proceedings of the 6th International Conference on Residual Stresses. London : IOM Communications Ltd., 2000. s. 751-758.
[International Conference on Residual Stresses/6th./. Oxford (GB), 10.07.2000-12.07.2000]
  Matějíček J., Brand P. C., Drews A. R.: Residual Stresses in Cold-Coiled Helical Automotive Springs. NIST Center for Neutron Research - Accomplishments and Opportunities. Washington, DC : US Govenment Printing Office, 2000. s. 42-43. - (NIST Special Publication 944.)
  Sadowski M., Langner J., Stanislawski J., Matějíček J., Kolman B., Chráska P.: Surface Modification of Plasma Sprayed Alumina Deposits by High-Energy Ion Beams. Nukleonika 45 [3] (2000) 199-202. [ Abstract ]&nnbsp;
1999 Kesler O., Matějíček J., Sampath S., Suresh S.: Measurement of Residual Stress in Plasma-Sprayed Composite Coatings with Graded and Uniform Compositions. Materials Science Forum 308-311 [-] (1999) 389-395. [ Link ] 
  Matějíček J.: Processing Effects on Residual Stress and Related Properties of Thermally. Stony Brook, US. 19990423. - Dept. of Materials Science and Engineering, Stony Brook : State University of New York, 1999. 170 s.
  Matějíček J., Sampath S., Brand P. C., Prask H. J.: Quenching, Thermal and Residual Stress in Plasma Sprayed Deposits:NiCrAIY and YSZ Coatings. Acta Materialia 47 [2] (1999) 607-617. [ Link ] 
  Jiang X., Sampath S., Matějíček J.: Substrate Temperature Effects on Splat Formation, Microstructure Development and Properties of Plasma Sprayed Coatings. Part 2.: Case Study for Molybdenum. Materials Science and Engineering A-Structural materials 272 [1] (1999) 189-198. [ Link ] 
  Sampath S., Jiang X., Matějíček J., Leger A. C., Vardelle A.: Substrate Temperature Effects on Splat Formation, Microstructure Development and Properties of Sprayed Coatings, Part I:Case Study for Partially Stabilized Zirconia. Materials Science and Engineering A-Structural materials 272 [1] (1999) 181-188. [ Link ] 
1998 Kesler O., Matějíček J., Sampath S., Suresh S., Gnaupel-Herold T., Brand P. C., Prask H. J.: Measurement of Residual Stress in Plasma-Sprayed Metallic, Ceramic and Composite Coatings. Materials Science and Engineering A-Structural materials 257 [2] (1998) 215-224.
  Matějíček J., Sampath S., : Processing Effects on Splat Formation, Microstructure and Quenching Stress in Plasma Sprayed Coatings. Herman H. (ed.), Coddet C. (ed.) ASM International, 1998. 6 s.
  Matějíček J., Sampath S., Dubský J.: Residual Stress Measurement in Plasma Sprayed Coatings by x-Ray Diffraction. Thermal Spray: A United Forum for Scientific and Technological Advances. Materials Park, OH : ASM International, 1998 - (Berndt, C.) s. 855-860. ISBN 0-87170-618-0.
[United Thermal Spray Conference /1./. Indianapolis (US), 15.09.1997-18.09.1997]
  Matějíček J., Sampath S., Dubský J.: X-ray Residual Stress Measurements in Metallic and Ceramic Plasma Sprayed Coatings. Journal of Thermal Spray Technology 7 [4] (1998) 489-496.
1997 Matějíček J., Sampath S., Brand P. C., Prask H. J. : Neutron Diffraction Residual Stress Measurement on Thermally Sprayed Coatings. Berndt C.C. (ed.) ASM International, 1997. 6 s. ISBN 0-87170-618-0.
1996 Sampath S., Matějíček J., Berndt C. C., Herman H., Leger A. C., Vardelle M., Vardelle A.: Plasma Sprayed Zirconia:Relationship among Particle Parameters, Splat Formation and Deposit Generation - Part 2:Microstructure and Properties. Fauchais P. (ed.), Berndt C.C. (ed.) ASM International, 1996. 8 s. ISBN 0-87170-583-4.
1995 Matějíček J.: The Influence of Plasma Spraying Parameters on Residual Macrostresses in Deposited Coatings. Materials structure 2 [2] (1995) 38-39.

 

 

after-logo-fusion.jpg after-logo-fusion.jpg after-logo-fusion.jpg after-logo-fusion.jpg after-logo-laserlab.jpg after-logo-fusion.jpg EM_fusion