The Academy of Sciences of the Czech rebublic - ASCR


Documentation for the preliminary market consultation

 
The cryogenic cooling system
Date of creation
Date of publication
Documentation title

 

Description of the documentation

 

June 10, 2019

June 14,

2019

Preliminary market consultation – The cryogenic cooling system Pre-notification text of the preliminary market consultation – The cryogenic cooling system, which was publicated on the TED (Tenders Electronic Daily) and on the VĚSTNÍK VEŘEJNÝCH ZAKÁZEK.

Jan. 16,

2020

February 3,

2020

The cryogenic cooling system - multilayer cryogenic insulation (MLI) This document is intended for the companies who shown interest in the Preliminary Market Consultation for COMPASS-U Cryogenic system to initiate discussion and have feedback on feasibility of multilayer cryogenic insulation (MLI). It will provide very basic information about the system which is in the Design Phase.
May 20, 2020 May 20, 2020 The cryogenic cooling system - Introductory presentation This document is intended for the companies who shown interest in the Preliminary Market Consultation for COMPASS-U Cryogenic system to initiate discussion have feedback on fabrication viability of the system. It will provide very basic information about the system which is in the Design Phase.
June 23, 2020 June 29, 2020 The cryogenic cooling system - Multilayer insulation (MLI) at
COMPASS-U
This document is intended for the companies who shown interest in the Preliminary Market Consultation for COMPASS-U Cryogenic system to initiate discussion and have feedback on feasibility of multilayer cryogenic insulation (MLI). It will provide very basic information about the system which is in the Design Phase.
July 1, 2020 July 1, 2020 The cryogenic cooling system - Update of introductory presentation v1.1 This document is intended for the companies who shown interest in the Preliminary Market Consultation for COMPASS-U Cryogenic system to initiate discussion have feedback on fabrication viability of the system. It will provide very basic information about the system which is in the Design Phase.

 

The support structure
Date of creation
Date of publication
Documentation title

 

Description of the documentation

 

June 10, 2019

June 14,

2019

Preliminary market consultation – The support structure
Pre-notification text of the preliminary market consultation – The support structure, which was publicated on the TED (Tenders Electronic Daily) and on the VĚSTNÍK VEŘEJNÝCH ZAKÁZEK.
July 26, 2019

July 30,

2019

Preliminary market consultation – The support structure This document is intended for the companies who shown interest in the Preliminary Market Consultation for COMPASS-U Support structure to initiate discussion have feedback on fabrication viability of the system. It will provide very basic information about the system which is in the Design Phase.
Feb. 27, 2020 February 27, 2020 Support structure of the COMPASS-U Tokamak This document is intended for the companies who shown interest in the Preliminary Market Consultation for COMPASS-U support structure system to initiate discussion have feedback on fabrication viability of the system.
Feb. 27, 2020 February 27, 2020 Model and drawings of Support structure
 
This document is intended for the companies who shown interest in the Preliminary Market Consultation for COMPASS-U Support structure for better understanding of design solution.
April 20, 2020 April 21, 2020 Support structure of the COMPASS-U tokamak - Appendix_A-Cryostat
This document is intended for the companies who shown interest in the Preliminary Market Consultation for Support structure of COMPASS-U tokamak to initiate discussion have feedback on fabrication viability of the system. It will provide very basic information about the system which is in the Design Phase.
April 20, 2020 April 21, 2020 Model and drawings of the Cryostat v9 of COMPASS-U tokamak
 
The model and drawings are intended for the companies who shown interest in the Preliminary Market Consultation for Support structure of COMPASS-U tokamak  for better understanding of manufacture procedure of Cryostat v9.
Oct. 21, 2020 Nov. 12, 2020 Soldered and brazed connections for COMPASS-U This document describes requirements on soldered/brazed connections on various components of COMPASS-U tokamak. It is intended for consultations with manufacturers and brazing/soldering technologists.
Jan. 13, 2021 Jan. 27, 2021 Support structure of the COMPASS-U tokamak - Appendix_A-Cryostat This update of document  is intended for the companies who shown interest in the Preliminary Market Consultation for Support structure of COMPASS-U tokamak to initiate discussion have feedback on fabrication viability of the system. It will provide very basic information about the system which is in the Design Phase.
Jan. 13, 2021 Jan. 27, 2021 Model and drawings of the Cryostat v8-D of COMPASS-U tokamak  The update of model and drawings are intended for the companies who shown interest in the Preliminary Market Consultation for Support structure of COMPASS-U tokamak  for better understanding of manufacture procedure of Cryostat v8-D.
March 15, 2021 March 22, 2021 Model and drawings of Support structure
 
This document is intended for the companies who shown interest in the Preliminary Market Consultation for COMPASS-U Support structure for better understanding of design solution.
May 25, 2021 May 26, 2021 Drawings of cooled support structure parts This document is intended for the companies who shown interest in the Preliminary Market Consultation for COMPASS-U Support structure for better understanding of design solution.

 

Coils of toroidal field
Date of creation
Date of publication
Documentation title

 

Description of the documentation

 

June 10, 2019

June 14,

2019

Preliminary market consultation –
Pre-notification text of the preliminary market consultation –
Coils of toroidal field,
which was publicated on the TED (Tenders Electronic Daily) and on the VĚSTNÍK VEŘEJNÝCH ZAKÁZEK.
Nov. 1, 2019 November 1, 2019 Toroidal field coils of the COMPASS-U tokamak This document is intended for the companies who shown interest in the Preliminary Market Consultation for COMPASS-U Toroidal field coils for better understanding of manufacture procedure.
Feb.18, 2020 February 18, 2020 Toroidal field coils of the COMPASS-U tokamak v2.0 This document is intended for the companies who shown interest in the Preliminary Market Consultation for COMPASS-U Toroidal field coils for better understanding of manufacture procedure.
Feb.18, 2020 February 18, 2020 Model and drawings of TF coils of COMPASS-U tokamak This document is intended for the companies who shown interest in the Preliminary Market Consultation for COMPASS-U Toroidal field coils for better understanding of manufacture procedure.
May 22, 2020 May 22, 2020 Central solenoid wound on TF core parts These models and drawings are intended for the companies who shown interest in the Preliminary Market Consultation for COMPASS-U Poloidal field coils for better understanding of manufacture procedure of CS coils wound on TF core.
July 16, 2020 July 21, 2020 Toroidal field coils of the COMPASS-U tokamak v3.0 This document is intended for the companies who shown interest in the Preliminary Market Consultation for COMPASS-U Toroidal field coils for better understanding of manufacture procedure.
July 16, 2020 July 21, 2020 Model and drawings of TF coils of COMPASS-U tokamak This document is intended for the companies who shown interest in the Preliminary Market Consultation for COMPASS-U Toroidal field coils for better understanding of manufacture procedure.
Oct. 21, 2020 Nov. 12, 2020 Soldered and brazed connections for COMPASS-U This document describes requirements on soldered/brazed connections on various components of COMPASS-U tokamak. It is intended for consultations with manufacturers and brazing/soldering technologists.
March 3, 2021 March 4, 2021 Spring plates for sliding joint of COMPASS Upgrade tokamak v0.1 Preliminary drawings of spring plates
April 15, 2021 April 19, 2021 ANSYS model of support structure with simplified geometry of toroidal field coils (v8) of the COMPASS-U tokamak. (1.5 GB) This document is intended for the companies who shown interest to do test of alternative geometries of toroidal field coils. Model contains volumetric forces for the worst case scenario.
April 15, 2021 April 19, 2021 Detailed STEP model of TF coils (v08) of COMPASS-U tokamak This document is intended for the companies who shown interest in modification of toroidal field coils geometry.
May 13, 2021 May 13, 2021 Toroidal field coils of the COMPASS-U tokamak v4.0 This document is intended for the companies who shown interest in the Preliminary Market Consultation for COMPASS-U Toroidal field coils for better understanding of manufacture procedure.
Oct. 18, 2021 Oct. 18, 2021 Toroidal field coils of the COMPASS-U tokamak v5.0 This document is intended for the companies who shown interest in the Preliminary Market Consultation for COMPASS-U Toroidal field coils for better understanding of manufacture procedure.
Oct. 18, 2021 Oct. 18, 2021 Model of TF coils of COMPASS-U tokamak This document is intended for the companies who shown interest in the Preliminary Market Consultation for COMPASS-U Toroidal field coils for better understanding of manufacture procedure.
Oct. 18, 2021 Oct. 18, 2021 Drawings of TF coils of COMPASS-U tokamak This document is intended for the companies who shown interest in the Preliminary Market Consultation for COMPASS-U Toroidal field coils for better understanding of manufacture procedure.

 

Coils of poloidal field and central solenoid
Date of creation
Date of publication
Documentation title

 

Description of the documentation

 

June 10, 2019

June 14,

2019

Preliminary market consultation – Coils of poloidal field and central solenoid
Pre-notification text of the preliminary market consultation – Coils of poloidal field and central solenoid, which was publicated on the TED (Tenders Electronic Daily) and on the VĚSTNÍK VEŘEJNÝCH ZAKÁZEK.
Oct. 9, 2019 October 9, 2019 Fabrication procedure for poloidal coils of COMPASS-Upgrade tokamak This document is intended for the companies who shown interest in the Preliminary Market Consultation for COMPASS-U Poloidal field coils to initiate discussion have feedback on fabrication viability of the system. It will provide very basic information about the system which is in the Design Phase.
Nov. 5, 2019 November 5, 2019 Fabrication procedure v1.1 for poloidal coils of COMPASS-Upgrade tokamak This document is intended for the companies who shown interest in the Preliminary Market Consultation for COMPASS-U Poloidal field coils to initiate discussion have feedback on fabrication viability of the system. It will provide very basic information about the system which is in the Design Phase.
Oct. 4, 2019 October 4, 2019 Poloidal field coils of
COMPASS-U tokamak

 
This document is intended for the companies who shown interest in the Preliminary Market Consultation for COMPASS-U Poloidal field coils to initiate discussion have feedback on fabrication viability of the system. It will provide very basic information about the system which is in the Design Phase.
April 9, 2020
April 17, 2020 Fabrication procedure for poloidal coils of COMPASS-Upgrade tokamak - v1.2 This document is intended for the companies who shown interest in the Preliminary Market Consultation for COMPASS-U Poloidal field coils to initiate discussion have feedback on fabrication viability of the system. It will provide very basic information about the system which is in the Design Phase. 
Oct. 26, 2020 Oct. 27, 2020 Material selection for poloidal coils of COMPASS-Upgrade tokamak 
 
This document is intended for the companies who shown interest in the Preliminary Market Consultation for COMPASS-U Poloidal field coils to initiate discussion have feedback on fabrication viability of the system. It will provide information about materials planned for PF coils.
Oct. 30, 2020 Nov. 2, 2020 Fabrication procedure v1.3 for poloidal coils of COMPASS-Upgrade tokamak This document is intended for the companies who shown interest in the Preliminary Market Consultation for COMPASS-U Poloidal field coils to initiate discussion have feedback on fabrication viability of the system. It will provide very basic information about the system which is in the Design Phase.
Oct. 21, 2020 Nov. 12, 2020 Soldered and brazed connections for COMPASS-U This document describes requirements on soldered/brazed connections on various components of COMPASS-U tokamak. It is intended for consultations with manufacturers and brazing/soldering technologists.
Nov. 20, 2020 Nov. 22, 2020 Presentation of conceptual fabrication of CS and TF core of COMPASS-Upgrade tokamak This document is intended for the companies who shown interest in the Preliminary Market Consultation for COMPASS-U Poloidal field coils to initiate discussion have feedback on fabrication viability of the system. It will provide very basic information about the system which is in the Design Phase.
Feb. 24, 2021 Feb. 24, 2021 Presentation of conceptual fabrication of CS and TF core of COMPASS-Upgrade tokamak v1.1 This document is intended for the companies who shown interest in the Preliminary Market Consultation for COMPASS-U Poloidal field coils to initiate discussion have feedback on fabrication viability of the system. It will provide very basic information about the system which is in the Design Phase.
April 20, 2021 April 20, 2021 COMPASS-U Poloidal field coils and central solenoid coils  v 1.1. This document is intended for the companies who shown interest in the Preliminary Market Consultation for COMPASS-U Poloidal field coils to initiate discussion have feedback on fabrication viability of the system. It will provide very basic information about the system which is in the Design Phase.
Technical drawing related to "Manufacture manual for PF coils of COMPASS-U tokamak"
Oct. 18, 2019 October 18, 2019 Model and drawing of the TF core of COMPASS-U tokamak
 
This document is intended for the companies who shown interest in the Preliminary Market Consultation for COMPASS-U Poloidal field coils for better understanding of manufacture procedure of CS coils wound on TF core.
April 9, 2020 April 17, 2020 Update of models and drawings of the TF core of COMPASS-U tokamak These models and drawings are intended for the companies who shown interest in the Preliminary Market Consultation for COMPASS-U Poloidal field coils for better understanding of manufacture procedure of CS coils wound on TF core.
April 15, 2020 April 17, 2020 PF coil models of COMPASS-U tokamak
 
These models are intended for the companies who shown interest in the Preliminary Market Consultation for COMPASS-U Poloidal field coils for better understanding of manufacture procedure.
April 16, 2020 April 17, 2020 CS coil models of COMPASS-U tokamak These models are intended for the companies who shown interest in the Preliminary Market Consultation for COMPASS-U Poloidal field coils for better understanding of manufacture procedure.
May 22, 2020 May 22, 2020 Central solenoid wound on TF core parts These models and drawings are intended for the companies who shown interest in the Preliminary Market Consultation for COMPASS-U Poloidal field coils for better understanding of manufacture procedure of CS coils wound on TF core.
Nov. 10, 2020 Nov. 10, 2020 Tie tube´s models of COMPASS-Upgrade tokamak
 
This document is intended for the companies who shown interest in the Preliminary Market Consultation for COMPASS-U Poloidal field coils to initiate discussion have feedback on fabrication viability of the system. It will provide information about Tie tube part planned for CS coils.

 

The vacuum vessel
Date of creation
Date of publication
Documentation title

 

Description of the documentation

 

June 10, 2019

June 14,

2019


Preliminary market consultation –

Pre-notification text of the preliminary market consultation – The vacuum vessel, which was publicated on the TED (Tenders Electronic Daily) and on the VĚSTNÍK VEŘEJNÝCH ZAKÁZEK.

June 28, 2019

July 8,

2019

Preliminary market consultation – This document is intended for the companies who shown interest in the Preliminary Market Consultation for COMPASS-U Vacuum Vessel system to initiate discussion have feedback on fabrication viability of the system. It will provide very basic information about the system which is in the Design Phase.
October 5, 2020 October 5, 2020 Model of Vacuum vessel - COMPASS-U tokamak project This model is intended for the companies who shown interest in the Preliminary Market Consultation for the Vacuum vessel of COMPASS-U for better understanding of design and manufacturing procedures.
May 27, 2021 May 28, 2021 Preliminary market consultation –
Vacuum vessel
This document is intended to provide a recent update of the COMPASS-U Vacuum Vessel to initiate the discussion within the Preliminary Market Consultations prior launching the manufacturing tenders. It provides an essential information and details to evaluate the scope and feasibility of the system.
May 27, 2021 May 28, 2021 Preliminary market consultation – Port extensions & bellows This document is intended to provide a recent update of the COMPASS-U Port extensions and Bellows to initiate the discussion within the Preliminary Market Consultations prior launching the manufacturing tenders. It provides an essential information and details to evaluate the scope and feasibility of the system.
June 4, 2021 June 7, 2021 Vacuum vessel assembly including heating loops and fastener elements This document is intended to provide a recent update of the COMPASS-U vacuum vessel assembly including heating loops and fastener elements to initiate the discussion within the Preliminary Market Consultations prior launching the manufacturing tenders. It provides an essential information and details to evaluate the scope and feasibility of the system.

 

The COMPASS-U plasma facing components
Date of creation
Date of publication
Documentation title

 

Description of the documentation

 

March 31, 2020

April 3,

2020


Preliminary market consultation – The COMPASS-U plasma facing components

Pre-notification text  of the preliminary market consultation – The COMPASS-U plasma facing components, which was publicated on the TED (Tenders Electronic Daily) and on the VĚSTNÍK VEŘEJNÝCH ZAKÁZEK.

April 8, 2020 April 8, 2020 Description of the COMPASS-U tokamak
plasma-facing components
(PFC)
This document is intended for the companies that have shown interest in the Preliminary Market Consultation for COMPASS-U plasma-facing components to initiate discussion, to have feedback on fabrication and viability of the components. It provides very basic information about the components which are still in Design Phase.
May 22, 2020 May 22, 2020 Update -Description of the COMPASS-U tokamak
plasma-facing components
(PFC)
This document is intended for the companies that have shown interest in the Preliminary Market Consultation for COMPASS-U plasma-facing components to initiate discussion, to have feedback on fabrication and viability of the components. It provides very basic information about the components which are still in Design Phase.
June 24, 2020 June 24, 2020 Update - Description of the COMPASS-U tokamak
plasma-facing components
(PFC)
This document is intended for the companies that have shown interest in the Preliminary Market Consultation for COMPASS-U plasma-facing components to initiate discussion, to have feedback on fabrication and viability of the components. It provides very basic information about the components which are still in Design Phase.
Feb. 1, 2021 Feb. 1, 2021 Update -Description of the COMPASS-U tokamak
plasma-facing components
(PFC)
This document is intended for the companies that have shown interest in the Preliminary Market Consultation for COMPASS-U plasma-facing components to initiate discussion, to have feedback on fabrication and viability of the components. It provides very basic information about the components which are still in Design Phase.
March 18, 2021 March 22, 2021 Step files of selected PFC tiles and of the support structure for the divertor (cassette)
 
This document is intended for the companies that have shown interest in the Preliminary Market Consultation for the COMPASS-U plasma-facing components to initiate discussions on the fabrication viability of different elements. It provides the models of selected PFC tiles with typical foreseen attachment schemes and shapes, as well as the model of the support structure of the divertor, so-called divertor cassette. Manufacturing tolerances are +/- 0.1mm for the tiles and +/- 0.1mm (in green) and +/- 0.5 mm (in grey) for the cassette (pictures attached in case the colors are not visible in the cassette step file).
May 18, 2021 May 19, 2021 Step files of selected PFC tiles and of the support structure for the divertor (cassette)
 
This document is intended for the companies that have shown interest in the Preliminary Market Consultation for the COMPASS-U plasma-facing components to initiate discussions on the fabrication viability of different elements. It provides the models and drawings of selected PFC tiles with typical foreseen attachment schemes and shapes, as well as the model of the support structure of the divertor, so-called divertor cassette. Manufacturing tolerances are +/- 0.1mm for the tiles and +/- 0.1mm (in green) and +/- 0.5 mm (in grey) for the cassette (pictures attached in case the colors are not visible in the cassette step file).